25p pressure reducing valve steam selection spesak valve Toyama valve

 

Product name	Model	Specification	Pressure	Material
25p steam pressure reducing valve	25P	DN20-300mm	PN1 6-2 5mpa	Cast steel; Stainless steel

I
Introduction to 25p steam pressure reducing valve , 25p steam pressure reducing valve is a new type of pressure reducing valve successfully developed with reference to foreign spesak pressure reducing valve, which has been greatly improved
The diaphragm adopts new materials and increases the working area
Therefore, any slight change in upstream pressure or downstream load can be fed back to the main valve diaphragm in time to adjust the opening of the main valve and ensure the determination of downstream pressure&# 65279;&# 65279;
Generally, a steam trap group shall be installed in front of the steam pressure reducing valve to realize the automatic and timely discharge of the condensate in front of the valve and avoid the water hammer damage caused by the condensate in the pipeline to the pressure reducing valve; If there is a lifting pipeline behind the pressure reducing valve, the corresponding drain valve group should also be installed; In addition, a filter with the same diameter as the inlet pipe shall be installed on the side of the horizontal pipe before the pressure reducing valve, and the filter screen shall not be less than 40 & mdash; 60 mesh