VM10U 5-Axis Vertical CNC Machining Center with D | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The VM10U is a new, automatic 5-axis vertical CNC machining center configured for milling and turning operations. Its linear-axis travels are 1050 mm in X, 1250 mm in Y, and 850 mm in Z. Rotary travel is listed as -140° to +140° for the A axis and n × 360° for the C axis.
Supported configuration The machine uses a direct-drive Φ1000 worktable with a stated maximum load of 2600 kg for milling and 1300 kg for turning. The A/C axes use hydraulic locking.
The HSK-A100 electric spindle is rated at 35/48 kW under the stated S1/S6-40% ratings, with 220/305 Nm torque and a maximum speed of 15,000 r/min. Through-spindle cutting-fluid delivery and rigid tapping are listed as available. X, Y, and Z rapid traverse is specified at 60 m/min per axis.
Rotary rapid speeds are listed as 40/100 r/min for A/C-axis milling and 40/550 r/min for A/C-axis turning. The stated positioning precision is 0.012 mm on each linear axis, with repeat positioning precision of 0.008 mm. A/C-axis positioning and repeat positioning values are listed as 7 and 4 arcseconds, respectively.
The structural description includes an integral cast gantry, an intermediate-driven triangular support beam, four Y-axis guide rails, a centrally located main drive, and a left-right symmetric arrangement intended to reduce thermal deformation.
Linear encoders and rotary encoders are listed as standard for full closed-loop control. Spindle thermal compensation is also specified. Tool handling is Published tool limits are 30 kg maximum weight, 500 mm maximum length, and Φ125 mm maximum diameter, increasing to Φ250 mm when adjacent positions are empty.
The machine footprint is listed as 4850 × 6600 × 4650 mm, and machine weight is 22 t.
Items to confirm before procurement Buyers should confirm the exact CNC control, electrical supply, included tooling and workholding, coolant and chip-management package, turning-mode configuration, installation foundation, commissioning scope, and acceptance-test procedure because these details are not stated.
The applicable measurement standard and test conditions for the published precision figures should also be documented. Confirm the certificate scope and obtain the applicable CE and ISO 9001 documentation for the supplied configuration.
Warranty coverage is stated as one year, but the start date, exclusions, labor, travel, freight, and on-site service arrangements should be clarified in the purchase contract.
VM10U | Applications and Buyer Notes
VM10U is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time quest
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- VM10UBased on visible page data; confirm exact value in the RFQ.
- Condition
- NewBased on visible page data; confirm exact value in the RFQ.
- Worktable
- Direct drive, Φ1000 mmBased on visible page data; confirm exact value in the RFQ.
- Machine type
- 5-axis vertical CNC machining centerBased on visible page data; confirm exact value in the RFQ.
- Spindle type
- Electric spindleBased on visible page data; confirm exact value in the RFQ.
- A-axis travel
- 140° to +140°Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Vmc215 Small Mini Cnc Milling Machine Vertical Machining Center Cnc Vertical Machining CentThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
LEYO U-200T 5-Axis Simultaneous Vertical CNC Machining Center with 20,000 rpm BT30 SpindleRequest Quote
VMC850 5-Axis High-Precision CNC Vertical Machining Center with Fanuc SystemRequest Quote
650 mm Travel 3-Axis Vertical CNC Machining Center with BT40 SpindleRequest Quote
VMC-U500 5-Axis Vertical CNC Machining Center for Complex Precision PartsRequest Quote
Timeway VMC650 3-Axis CNC Vertical Machining Center with 1000 × 420 mm TableRequest Quote
GT DMTG VMC850 3-Axis Vertical CNC Machining Center with 1000 × 500 mm TableRequest QuoteCNCMillHub related sourcing paths
Tooling And Fixture Procurement
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...