VFD-RYE-8-P002 8-Channel HMI and PLC Variable-Fre | RFQ Sourcing Details

The VFD-RYE-8-P002 is an integrated low-voltage variable-frequency control cabinet designed for centralized control of multiple motors. Its stated configuration combines eight independently operating RYE VFD units with a modular PLC, expanded I/O modules, and a door-mounted HMI touch screen.

The system supports synchronous linked speed control as well as independent operation of individual drives. The HMI provides visual operating-data display, parameter adjustment, status monitoring, start/stop control, operating-mode selection, and fault-information access without opening the cabinet.

The PLC can be programmed for process sequences, start/stop interlocks, signal collection, and application-specific control logic. The listed drive functions include soft starting and stepless variable-frequency speed regulation.

The described electrical arrangement includes an incoming molded-case circuit breaker, branch miniature circuit breakers, a control transformer, signal relays, terminal blocks, a DC switching power supply, and grounding provisions.

Listed protection functions include overload, short-circuit, overcurrent, overvoltage, undervoltage, and overheating protection. Ventilation louvers and forced-cooling fans are described for cabinet heat dissipation.

Supported configuration data includes AC 380 V or 220 V at 50 Hz, 660 V rated insulation voltage, copper busbars, and selectable rated-current and short-time withstand-current levels. The enclosure is customizable, with floor-mounted and wall-mounted installation listed.

Protection grades from IP30 to IP66 are presented as configurable options rather than a single standard build. The stated application range covers industrial facilities, factories, buildings, energy systems, fan and pump groups, material conveyors, production-line equipment, and multi-motor automation upgrades.

Suitability for a ho trol sequence.

Before procurement, the buyer should confirm the final single-line diagram, supply voltage and frequency, motor quantity and ratings, VFD sizing, required control logic, HMI functions, communication interfaces, protection coordination, enclosure dimensions, mounting method, ingress-protection grade, cooling requirements, cable-entry arrangement, and component brands.

Certification applicability should also be verified for the exact configured cabinet and destination market. These project-specific selections should be documented in the approved technical schedule and drawings before production.