PLCDriveHubPLC, HMI, sensors, drives, controllers, robots, and factory automation parts for global industrial buyers.
TX23D38VM0CAA Rev. B 9.0-Inch 800 × 480 TFT-LCD Module with WLED Backlight
Hmi Panels

TX23D38VM0CAA Rev. B 9.0-Inch 800 × 480 TFT-LCD M | RFQ Sourcing Details

Hmi Panels · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryHMI Panels
Unitset
ModelTX23D38VM0CAA Rev. B
BacklightWLED with LED driver
Brightness500 cd/m² typical
Frame rate60 Hz
Resolution800(RGB) × 480, WVGA
Active area195 × 117 mm
CategoryHmi Panels
AvailabilityInquiry required
Source date2026-07-21

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Hmi Panels. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

The TX23D38VM0CAA Rev. B is a 9.0-inch a-Si TFT-LCD module intended for HMI and automated-equipment display requirements. Its active-matrix panel has an 800(RGB) × 480 WVGA resolution, rectangular pixel format and a 60 Hz frame rate.

The listed active area is 195 × 117 mm, while the panel outline is 218 × 135 × 11.45 mm. Supported display characteristics include 500 cd/m² typical brightness, 85/85/85/85-degree typical viewing angles at CR ≥10, and 262K/16.7M stated color support with 60% NTSC.

Typical response time is listed as 25 ms, and typical total power consumption is 8.46 W. The module incorporates a WLED backlight and LED driver;stated backlight life is at least 70,000 hours. The panel does not include a touch screen.

Its listed operating-temperature range is -20 to 70°C, and its storage-temperature range is -30 to 80°C. Typical panel weight is 330 g, and the stated maximum vibration level is 2.0 G (19.6 m/s²).

Procurement note: the source information describes a 20-pin connection and also references 8-bit parallel and single-channel 6/8-bit LVDS.

Because those interface entries are not internally clear, buyers should confirm the exact electrical interface, connector and pin assignment against the revision-specific datasheet before ordering. Also verify the full part number and Rev.

B marking, mounting geometry, input power requirements, display-color mode, backlight-life test conditions and compatibility with the target HMI controller.

If the module is being purchased as a replacement, compare the original panel label, cable orientation, connector position and mechanical envelope rather than relying on screen size and resolution alone.

TX23D38VM0CAA | Applications and Buyer Notes

TX23D38VM0CAA is organized as a sourcing-ready Hmi Panels reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time question

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
HMI PanelsBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
Model
TX23D38VM0CAA Rev. BBased on visible page data; confirm exact value in the RFQ.
Backlight
WLED with LED driverBased on visible page data; confirm exact value in the RFQ.
Brightness
500 cd/m² typicalBased on visible page data; confirm exact value in the RFQ.
Frame rate
60 HzBased on visible page data; confirm exact value in the RFQ.
Resolution
800(RGB) × 480, WVGABased on visible page data; confirm exact value in the RFQ.
Active area
195 × 117 mmBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryHMI Panels
Unitset
ModelTX23D38VM0CAA Rev. B
BacklightWLED with LED driver
Brightness500 cd/m² typical
Frame rate60 Hz
Resolution800(RGB) × 480, WVGA
Active area195 × 117 mm
Display typea-Si TFT-LCD module
Diagonal size9.0 inches
Pixel density104 PPI
Response time25 ms typical (Tr+Td)
Viewing angle85/85/85/85° typical, CR ≥10
Display colors262K/16.7M;60% NTSC stated
Outline dimensions218 × 135 × 11.45 mm
Operating temperature20 to 70°C
Total power consumption8.46 W typical

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

PLCDriveHub related sourcing paths

PLCDriveHub procurement phrases

PLCDriveHub related product samples

Supplier profile

PLCDriveHub Imported Supplier Pool
主营:HMI Panels

View full profile >