NVICKS V Series Double-Acting Hydraulic Vane Pump | RFQ Sourcing Details

The NVICKS V Series is a double-acting hydraulic vane pump for medium-pressure hydraulic systems. Listed series include 20V, 25V, 35V, and 45V, with flow codes spanning 2 to 75 US gpm across the range.

Published geometric displacement values extend from 7.5 mL/rev (0.46 in³/rev) for the 20V-2 configuration to 237 mL/rev (14.46 in³/rev) for the 45V-75 configuration. The model designation supports selection by series, flow code, port connection, shaft type, outlet position, design number, and rotation.

The listed port connection is an SAE four-bolt flange. Available shaft selections depend on series and include straight-key, heavy-duty straight-key, and spline versions. Outlet positions can be opposite the inlet, 90° counterclockwise from the inlet, inline with the inlet, or 90° clockwise from the inlet.

Right-hand clockwise and left-hand counterclockwise rotations are listed, with rotation viewed from the shaft end. Published operating data depends on both configuration and fluid.

With antiwear hydraulic oil, listed maximum pressure reaches 20.7 MPa for some 20V flow codes and 17.2 MPa for the 25V, 35V, and 45V series;the listed maximum speed is 1,800 r/min. Data is also provided for phosphate ester, water-glycol, and water-oil emulsion fluids, with different pressure and speed limits.

The listed minimum speed is 600 r/min. A cartridge-based construction is described to support component replacement and maintenance. Listed internal parts include the shaft, shaft seal, bearing, cartridge, gasket, O-ring, covers, retainers, and fasteners.

Suggested uses in the supplied product information include machine tools, hydraulic power units, injection-molding auxiliary systems, and industrial equipment. These are general application references, not confirmation that every V Series configuration will suit a particular circuit.

Procurement confirmation: Before ordering, the buyer should identify the exact series and flow code and request the corresponding configuration record.

Confirm the working fluid, required displacement and flow, continuous and peak pressure, operating speed, shaft interface, flange and port details, outlet orientation, and direction of rotation.

Buyers should also verify the dimensional drawing for the selected model, seal material, noise-test conditions, certification documents, and whether the requested unit is supplied under the NVICKS name or as an OEM configuration.

Confirm customization scope, inspection documents, included parts, packaging, production lead time, technical-support arrangements, and the applicable one-year warranty terms in the final order documentation.