Three-Phase Cast Resin Dry-Type Transformer for I | RFQ Sourcing Details
Dry Type Transformers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Dry Type Transformers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This three-phase cast-resin dry-type transformer is intended for indoor power-distribution projects. The listed construction uses a silicon-steel core and epoxy-resin cast coils rather than an oil-filled insulation system.
Insulation cylinders and other insulating components are positioned between the high- and low-voltage windings. The basic configuration is identified as a core-type, two-winding, power-frequency distribution transformer.
The listed capacity range for this product is 50 kVA to 3150 kVA, while the broader customization information describes project-specific solutions from 25 kVA to 4000 kVA and voltage ratings from 6 kV to 35 kV. Buyers should therefore confirm the available rating for the exact model being quoted.
Configurable items include voltage ratings, capacity, AN natural-air or AF forced-air cooling, insulation class, installation type, and copper or aluminum coil material. In es. A published performance table covers ratings from 30 kVA through 2500 kVA.
The table identifies a 10 kV high-voltage winding with ±2 × 2.5% tapping, a 0.4 kV low-voltage winding, Dyn11 vector group, and rating-dependent impedance, current, loss, and weight values.
These figures should not be generalized across every offered configuration;the buyer should request a model-specific data sheet for the selected capacity and voltage arrangement.
For procurement, confirm the required primary and secondary voltages, frequency, vector group, rated capacity, tap range, short-circuit impedance, winding material, cooling method, enclosure requirements, insulation class, ambient conditions, altitude, temperature-monitoring package, and installation clearances.
Also request the guaranteed no-load and load losses, temperature-rise limits, dimensions, total mass, routine and type test documentation, and the exact standard edition applicable to the ordered unit.
The listing identifies IEC 60076, ISO 9001 certification, indoor installation, customization availability, a one-set minimum order, and an indicated production lead time of about 25–30 days after deposit;all order-specific terms should be reconfirmed in the final technical and commercial documents.
Three-Phase | Applications and Buyer Notes
Three-Phase is organized as a sourcing-ready Dry Type Transformers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Dry Type TransformersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Phase
- Three phaseBased on visible page data; confirm exact value in the RFQ.
- Cooling
- Dry type;configurable AN natural air or AF forced airBased on visible page data; confirm exact value in the RFQ.
- Packaging
- Export plywood packingBased on visible page data; confirm exact value in the RFQ.
- Construction
- Core-type, two-winding transformerBased on visible page data; confirm exact value in the RFQ.
- Installation
- IndoorBased on visible page data; confirm exact value in the RFQ.
- Example model
- SCB11-1000Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cables Busbar And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Meters And Protection Devices categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Switchgear And Breakers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Transformers And Substation Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Ip65 Switchgear Panels sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100 315 Kva Three Phase Copper Wound Oil Immersed Distribution TransformerThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv Distribution Transformers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Electrical Equipment Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Cast Resin Dry Type Transformer Ul Certified 10kv Cast Resin And Ul CertifiedThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Dry Type Transformer For Solar Power Systems 100kva And Solar Power SystemsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Epoxy Resin Indoor Electric Single Phase Potential Transformer PtThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
SCB14 20 kV Epoxy Resin Cast Three-Phase Dry-Type Distribution Transformer, 30–2500 kVARequest Quote
2000 kVA Three-Phase Cast-Resin Dry-Type Step-Up/Step-Down Transformer with EnclosureRequest Quote
250 kVA Three-Phase Cast Resin Dry-Type Step-Down TransformerRequest Quote
Three-Phase 11 kV to 0.4 kV Cast-Resin Dry-Type Distribution TransformerRequest Quote
SCB/SCBH Three-Phase Epoxy Resin Dry-Type Power TransformerRequest Quote
Scb Three Phase Medium and High Voltage Epoxy Resin Casted Dry Type TransformerRequest QuotePowerGridSource related sourcing paths
PowerGridSource procurement phrases
PowerGridSource related product samples
DJB-426 6 Phase Relay Test Kit-199 "microcomputer relay protection test device technology", list
Transformers and Substation Equipment 66kv 35kv 20kv 11kv Combined Transformer Substation Package CompactIntroduction: The needs of the wind power plant developed a special combination of a series of wind power substation, th...
Transformers and Substation Equipment 30kVA 50kVA 63kVA 80kVA 100kVA 10kv 33kv Zgs American Prefabricated Compact Substation - SubstationThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment American Type Outdoor Usage Combined Power Transformer Box Substation - Substation and Electrical EqThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment Substation Cable Junction Plug Terminal Joint Electrical Equipment for Power Substation Price - SubsThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment 132kv 11.5kv 25mvaOutdoor,dust and water proof-phase,two-pole,vertical break