SP-EDU1 Compact 5-Axis CNC Milling Machine for Ed | RFQ Sourcing Details
Cnc Machining Centers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cnc Machining Centers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The SP-EDU1 is a compact vertical CNC milling machine intended for educational use and metal-processing operations including milling, drilling, tapping, and boring.
Its specified working envelope combines 240 mm X travel, 220 mm Y travel, and 280 mm Z travel with an A-axis range of -30° to +110° and 360° C-axis movement. The 160 mm table has a stated maximum load of 10 kg. The machine is equipped with an ER11 high-speed electric spindle rated at 0.8 kW and 24,000 r/min.
Listed control capabilities include simultaneous 5-axis linkage interpolation, RTCP, 3+2 machining, tool-length compensation, coordinate-system offsets, inclined-surface machining, absolute encoder support, encoder and grating-scale feedback, pitch-error compensation, and STL 3D processing preview.
The specification also describes interruption recovery and segment-skipping functions. The stated XYZ rapid speed is 5 m/min. A- and C-axis speeds are each listed as 20 r/min.
Published accuracy figures are 0.015 mm XYZ positioning accuracy, 0.01 mm XYZ repeatability, 30 arc-seconds A/C positioning accuracy, and 20 arc-seconds A/C repeatability.
The machine is specified with an integrated cast bed, ball screws, guide rails, 3.5 kVA total power, a 400 kg machine weight, and overall dimensions of 1600 × 960 × 2000 mm.
Procurement questions to confirm: Buyers should verify the supplied CNC controller configuration, included tooling and accessories, electrical supply requirements, axis calibration and acceptance-test method, supported program-transfer workflow, coolant and chip-management provisions, guarding and classroom safety features, installation requirements, training scope, and the exact contents of the plywood packing.
Buyers should also confirm whether the stated accuracy values apply under their intended operating conditions and request the applicable certification documents for the ordered configuration.
Customization availability, production lead time, shipping arrangements, warranty coverage, and after-sales terms should be documented in the purchase contract before ordering.
SP-EDU1 | Applications and Buyer Notes
SP-EDU1 is organized as a sourcing-ready Cnc Machining Centers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- CNC Machining CentersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- SP-EDU1Based on visible page data; confirm exact value in the RFQ.
- Table size
- 160 mmBased on visible page data; confirm exact value in the RFQ.
- A-axis range
- 30° to +110°Based on visible page data; confirm exact value in the RFQ.
- C-axis range
- 360°Based on visible page data; confirm exact value in the RFQ.
- Intended use
- Education and metal processingBased on visible page data; confirm exact value in the RFQ.
- Machine type
- Compact 5-axis vertical CNC milling machineBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machining Centers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Off Good Quality Vertical Machining Center Vmc850 3 Axis Cnc Vertical Machining Center For SaleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathes And Turning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Milling Drilling And Grinding categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Tooling Fixtures And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Lathe Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cnc Machine Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 650 Mm Travel 3 Axis Vertical Cnc Machining Center With Bt40 SpindleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Machining Center Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 4 Axis Small Cnc Milling Machine Vmc850 Vertical Machining Center Cnc Vertical Machining CenterThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3 Axis Large High Perform Cnc Controller Vertical Milling Machining Center Vmc960This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VMC-U500 5-Axis CNC Vertical Machining Center for Complex-Part MillingRequest Quote
T1000 Compact 3/4/5-Axis CNC Vertical Machining Center with 1000 × 500 × 450 mm TravelRequest Quote
LEYO T700 5-Axis Compact Vertical Drilling, Tapping and Milling CenterRequest Quote
JZ-855-12 3-Axis CNC Drilling and Milling Machining CenterRequest Quote
LEYO U-200T 5-Axis Simultaneous Vertical CNC Machining Center with 20,000 rpm BT30 SpindleRequest Quote
KDVM1580L BT50 CNC Vertical Machining Center with 1500 mm X-Axis TravelRequest QuoteCNCMillHub related sourcing paths
Tooling And Fixture Procurement
CNCMillHub procurement phrases
CNCMillHub related product samples
Parameters: Working table Table size 1200×600mm T-slot 5-18-100mm Max loading capacity of table 1000kg Travel X,Y,Z axis...
CNC Machining Centers Vmc Fresadora Vmc1160 Metal 3 4 5 Axis Milling Machine CNC Vertical Machining Center - Vertical MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Ultra Precision High Speed Vertical Machining Center Vmc1160 Hot Sale CNC Milling Machine - CNC MachUsage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Vertical Machining Center Vmc650 Precision 5 Axis CNC Milling Machine Price - Milling Machine and 5Usage: This vertical machining center is suitable for the mechanical processing and mold making. And it can adapt to the...
CNC Machining Centers Zxx-C3018 Cheap and Easy to Use Shaped Glass Edge Polishing Milling CNC Machining Center - CNC RouteDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...
CNC Machining Centers Factory Price Zxx-C3018 Hot Glass/Stone CNC Machining Center Factory Direct - CNC Router and CNC MilDescription unit parameter Model No. 1 ZXX-C 3018 Colum Set Heavy iron Control System set LEETRO Axis PC Cutter change :...