JR-MBR-20-SS100 Reinforced PVDF Hollow-Fiber Subm | RFQ Sourcing Details

Product overview The JR-MBR-20-SS100 is an immersed membrane bioreactor ultrafiltration system built around reinforced PVDF hollow fibers.

The listed configuration provides 2,000 m² of effective membrane area and is intended for municipal or industrial wastewater recycling, water reuse, and pretreatment ahead of RO, NF, or desalination processes. The hollow fibers have a stated 0.03 μm pore size and 1.0/2.0 mm inner/outer diameter.

Listed operating parameters include flux up to 25 LMH, backwash flux of at least 30 LMH, operating TMP of 0.05 MPa, a pH range of 2–11, and a temperature range of 5–40°C. The stated pure-water flux is at least 800 L/m²·h under the specified test condition of 0.1 MPa and 25°C.

Chemical cleaning is listed for pH 1–14, and Na. ClO tolerance is stated as 5,000 ppm. For the complete JR-MBR-20-SS100 assembly, the stated dimensions are 2,100 × 1,450 × 4,550 mm, with a dry weight of 1,175 kg and rated water production of 320–760 m³/day.

Connections are listed as DN15 internal thread and DN15 socket. The membrane housing is ABS, and the potting material is epoxy resin. The unit is supplied in a wooden case;listed packed dimensions are 222 × 157 × 477 cm with a gross weight of 1,275 kg.

Reported permeate parameters include turbidity no greater than 0.5 NTU, SDI15 no greater than 5.0, E. coli not detected, and total bacterial count no greater than 3 CFU/mL.

These are stated product parameters;buyers should confirm the applicable test methods, feed-water conditions, sampling protocol, and acceptance criteria for their project.

Procurement questions to confirm Before specifying or ordering, confirm whether the 320–760 m³/day production range is achievable with the project’s actual influent, temperature, solids loading, aeration, cleaning regime, and target recovery.

Request the design basis for module quantity, tank arrangement, blower and air-scour requirements, pumps, controls, piping, and pretreatment.

Also confirm which system components are included, the exact connection arrangement, allowable transmembrane-pressure limits during each operating mode, and the recommended cleaning chemicals and concentrations.

Buyers should also request documentation supporting the listed permeate-quality and mechanical-performance figures, including test standards and test conditions.

Confirm customization scope, installation requirements, commissioning support, spare-parts availability, inspection criteria, packaging details, delivery schedule, warranty terms, and the final approved technical datasheet before purchase.