KCL-D3015 CNC Fiber Laser Cutting Machine with 30 | RFQ Sourcing Details

The KCL-D3015 is a CNC fiber laser cutting machine specified with a 3000 × 1500 mm cutting range. The listing presents 2000 W and 3000 W options prominently and also identifies a wider selection of laser-power configurations across the KCL-D series.

Because performance and equipment content may vary by configuration, the ordered power level and complete bill of materials should be documented before purchase. Supported machine details The machine uses a Cyp. Cut control system and a water-cooling system.

Its structure is described as a welded steel frame that undergoes annealing at more than 600 degrees to relieve stress. The aluminum beam is produced through casting, annealing, machining, and vibration-aging stages. A Japan Fuji servo motor and a France Motoreducer are listed among the equipment details.

The KCL-D series table specifies a maximum idle speed of 160 m/min, positioning accuracy of 0.03 mm, and repositioning accuracy of 0.02 mm. It also lists maximum cutting speed of 35–80 m/min, while another basic-information section states 15–45 mm/s for 1 mm stainless steel.

These figures use different conditions and units, so buyers should request a model-specific acceptance standard rather than treating them as directly comparable. The laser-source section lists MAX, Raycus, and IPG options. Various laser-head brands are also stated to be available.

The described cutting head uses three protective lenses and two-way optical water cooling. The source material names aluminum, copper, brass, stainless steel, iron, and other metals, but it does not provide a complete verified thickness chart for each material and power level.

Configuration and support A Hanli industrial chiller and touch screen are listed. An air compressor, voltage regulator, and dust-extraction system are identified as optional equipment. Customization is stated to be available.

Support includes training for machine installation and use, and the stated warranty period is two years.

Procurement questions to confirm Before ordering, confirm the exact KCL model, usable cutting area, laser power, laser-source brand, cutting-head brand, servo package, voltage and frequency, and every included accessory.

Request a material-and-thickness cutting table for the selected power level, including required assist gas, target edge quality, and production speed. Buyers should also agree on accuracy and speed acceptance tests using defined materials and operating conditions.

Confirm whether the quoted machine includes a pallet-changing system, since that feature is described in the source material but is not clearly tied to every configuration.

The package dimensions are listed as 480 × 220 × 240 cm, while the stated gross weight is 12 kg;this apparent mismatch should be resolved in the final packing list.

Also verify installation requirements, site preparation, operator training format, documentation, spare parts, optional extraction equipment, and the exact scope and procedure of warranty service.